全国免费服务热线:13961126910

联系我们

常州市源光自动化设备有限公司

联系人: 王先生

手   机: 13961126910

电   话: 0519-86152796

传   真: 0519-86162796

邮   箱: yuanguangkeji@163.com

网   址: www.autoyg.cn

地   址: 常州市武进区雪堰工业集中区华福路2号

详细信息

组件返修台


外形尺寸:2300*1260*900
设备特点:
1. 温度控制方式:进口温度控制器,智能型PID温度控制,精度高,稳定可靠,并可根据作业环境调整工作参数。
2. 温控精度: ±1℃
3. 安全装置: 设置温度安全系统, 温度失控或超过设定范围,安全系统发出声光报警,同时停止加热。
4.系统设置: 加热系统独立作业, 在关闭加热系统后仍可以观测到加热平台的温度。
5.保护装置: 设置非金属边框,对加热板进行隔离,避免电池板在修复过程中玻璃划伤或破碎。
6. 设置紧急按钮,紧急情况可迅速处理并强制切断整机电源。
7. 以电加热形式进行加热,通过电热管传导热量,热量散失量小,通过对加热板进行温度、 隔热、绝缘处理后有效提高转换效率。
8. 通过温度控制器调节温度的上限值和下限值,可使工作台在合适的温度范围内进行工作
Dimension: 2300*1260*900
Technical characteristics:
1. Temperature control mode: Inlet temperature controller, intelligent PID temperature control, stable and reliable, and be capable to adjust operating parameters based on operation environment.
2. Temperature control accuracy:  ±1℃
3. Safety device: set up temperature safety system, safety system shall give out sound-light alarm and meanwhile stop heating once temperature is out of control or exceeds setting range.
4. System settings: Heating system works independently, and it is able to observe temperature of heating platform after heating system is shutdown.
5. Protective device: provided with non-metal trim to isolate from heating board and avoid scratching or breaking by glass during repairing of battery board.
6. Alarm system setting: it will cut off electricity when emergency appears.
7. Electrical heating system: applied with elector-heating tube to reduce heat loss and after dealing with temperature, heat protection and insulation to heating board, the efficiency will be higher.
8. Temperature control: adjust the upper limit and lower limit to make machine work under suitable temperature

热门城市: 更多...

相关新闻

相关产品

电池串周转车

第二代全自动层压机使用现场

第二代全自动层压机

电池串周转车

全自动装框机